Everyday wear and tear can harm or wipe out the drawers on your dresser. You could get a new dresser, but, if you want to preserve your dresser for sentimental reasons or save money, replacement drawers could be the answer. Outfits drawer construction requires small hard work and minor cash. Using a simple design technique, you can replace your dresser drawers in an afternoon.
Use a round noticed to cut a piece of 9-by-31-by-1-inch wood for the drawer front. Reduce 3 pieces of 24-by-7-by-three/four-inch plywood for the two drawer sides and the drawer back again. Lower one particular piece of 29-by-7-by-three/4-inch plywood for the drawer’s base. Sand the cut items with medium-grit sandpaper.
Cut three grooves three-fourth inches deep and broad into the drawer front making use of a router. Location the very first groove one-inch in from possibly limited side of the drawer front and one inch up from the base of the drawer. Area the other two grooves the exact same length in from the sides of the drawer entrance and one inch from the bottom and best edge. Intersect the shorter grooves with the prolonged one.
Fill all a few grooves with wooden glue. Insert the drawer bottom into the lengthier groove and the drawer sides into the shorter grooves. Use wood glue where the sides and bottom meet. Hammer a ending nail via the drawer sides into the drawer bottom each 6 inches.
Place the drawer back from the edges of the drawer bottom and drawer sides. Utilize wooden glue in which the pieces meet up with. Safe the back again of the drawer with a lot more ending nails each 6 inches.
Paint or stain the drawer to match the finish of the present dresser. Permit the paint or stain to dry a few to five hrs.
Attach drawer pulls to the drawer front. The attachment process will vary based mostly on the drawer pull. Nevertheless, most need you to drill a hole by means of the entrance of the drawer. Use the included attachment screws to set up the drawer pulls.
Tidak ada komentar:
Posting Komentar